erlug
[Top] [All Lists]

Re: [Erlug] 'n va piu'

To: erlug@xxxxxxxxxxxxxx (Maurizio Lemmo - Tannoiser)
Subject: Re: [Erlug] 'n va piu'
From: stezane@xxxxxx (Stefano Zanelli)
Date: Sun, 25 Aug 2002 15:07:18 +0000
 Ciao, Maurizio! Il 25 Aug 02 scrivevi a erlug@xxxxxxxxxxxxxx

>> Qualche idea???

MLT> verifica l'esistenza del link simbolico /dev/cdrom e a dove punta, e
MLT> verifica che questo coincida con quanto rilevato dal kernel (hints:
MLT> dmesg).

/dev/cdrom punta ad hdc
Ti allego /var/log/dmesg. A me sembra ok

MLT> Ti ricordo che se hai attiva l'emulazione scsi per i cdrom/rw ide,
MLT> questi cambiano cmq tutti device (non piu` /dev/hd_qualcosa, ma
MLT> /dev/s_qualcosa).

Il fatto e' che il CDrom/rw, dopo il disatro del te dell 5, non sono piu'
riuscito a farlo funzionare e mi piacerebbe rivederlo funzionare. Dopo aver 
letto di quel tizio che si e' sputtanato la MBR e non aveva un back up mi e'
venuto un terrore folle di perdere tutti i miei lavori e fatture.


=== Cut ===
Linux version 2.4.7-10 (bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version
2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Thu Sep 6 17:27:27 EDT 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
On node 0 totalpages: 16384
zone(0): 4096 pages.
zone(1): 12288 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/hdb1
Initializing CPU#0
Detected 300.685 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 599.65 BogoMIPS
Memory: 61332k/65536k available (1269k kernel code, 3432k reserved, 90k
data, 220k init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Covington) stepping 00
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: Calling quirk for 01:00
isapnp: SB audio device quirk - increasing port range
isapnp: Card 'Creative SB16 PnP'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
mxt_scan_bios: enter
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
block: queued sectors max/low 40674kB/13558kB, 128 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
ide3: Creative SB16 PnP IDE interface
hda: QUANTUM FIREBALL ST1.6A, ATA DISK drive
hdb: QUANTUM FIREBALLlct08 08, ATA DISK drive
hdc: CREATIVE CD-RW RW8438E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 3153024 sectors (1614 MB) w/81KiB Cache, CHS=782/64/63, UDMA(33)
hdb: 16514064 sectors (8455 MB) w/418KiB Cache, CHS=1027/255/63, UDMA(33)
ide-floppy driver 0.97
Partition check:
 hda: hda1 hda2
 hdb: hdb1 hdb2 < hdb5 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 320k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 220k freed
Adding Swap: 72252k swap-space (priority -1)
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,65), internal journal
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: Creative SB16 PnP detected
sb: ISAPnP reports 'Creative SB16 PnP' at i/o 0x220, irq 5, dma 1, 5
SB 4.13 detected OK (220)
sb: 1 Soundblaster PnP card(s) found.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
=== Cut ===

Ciao.  Stefano             - wmw -
       http://members.xoom.it/stz/


La democrazia e' in crisi???
Lo sapremo dopo la pubblicita'


<Prev in Thread] Current Thread [Next in Thread>